Smart - Less power great performances


linea smartSMART is the response to increasing demand for both low energy consumption and high efficiency. It is based on many years’ experience in road lighting, offering exceptional performance.
An indisputably pure design and impeccable construction: the perfect combination to ensure the best on the market.

Technical features

• The housing (body and top cover) is manufactured from die-cast aluminium alloy and finish with a thermo polyester grey colour powder paint. On request: twin colours.
• Reflector is made of high purity (99,8%) one piece pressed electro-polished anodised aluminium.
• Post top entry installation, Ø 46 ÷ 60mm.
• Post top entry installation with accessory ,Ø 72 ÷ 76 mm.
• Post top tilt angles can be : 0° +5° +10°
• Side entry installation, Ø 46 ÷ 60mm.,the luminaire gets inclination of the arm.
• In case of side entry installation with tilt of 10° and 15°, an inclination luminaire accessory limiting the tilt at 0°, is supplied
• Gaskets are made of anti-age weather resistant silicon rubber Σ
• For Class II electrical safety switch disconnects the main power supply on opening the luminaire in maintenance.
• Porcelain lampholder with horizontal and vertical mechanical focusing device.
• Adjustable reflector in order to optimise the optical perfomance and light distribution.
• Connection to power supply via a cable gland PG 13,5 - IP 68
• Anti vacuum device.
• Zinc coated gear tray for insulation Class I; glass reinforced nylon gear tray for insulation Class II.
• Both gear trays are completed with lamp holder and/or electrical connectors for fast replacement and easy maintenance.
• As optional the luminaire can be provided with a fuse.
• The gear and lamp compartment can be easily accessed by opening the fore stainless steel hook.

Output ratio: cut-off.
Optic group with thermal toughened flat glass.
Wind exposed surface = 0,0870 m2

Output ratio: semi cut-off.
Optic group with thermal toughened curved glass.
Wind exposed surface = 0,0980 m2

For quick and safety inspection the luminaire is supplied with anti-tipping cover device.certificazioni
Electrical components are certified with ENEC Mark. Power supply: 230V; 50Hz.
European Standards: EN 60598/1
Maximum mounting height: 15 mt.

The “Dark Sky®” lighting telemanagement system

The lighting control, according to CEN/TR13201-1 and EN 13201 - 2/3/4 or UNI 10439 or DIN 5044 and ISO 50001 EMS standards is only possible if there are the best safety conditions for road users.
The Dark Sky ®, networked control, can continuously vary the light output from 0 to 100%, monitoring and controlling the amount of efficient light at the right place, at the right time, providing energy reporting. Maximum savings can be accomplished by using specific schedule or  custom cycles of adjustments for :

The true cost of the light you buy, is the sum of three elements: initial capital cost, energy consumed and maintenance, usually energy is the largest item. Dark system will save significant amounts of energy, compared to older alternative technologies. In other words this means:
- 48 % saving in energy costs;
- Up to 40% extra energy savings;
- High system efficiency to save energy;
- High system efficiency to save energy;
- Increasing, to the level of a single each luminaire, the power factor up to 0,99;
- Lowering of lamp high inrush current;
- An extended lamp life due to soft ignition and control of electrical and thermal stresses;
- Every day the correct operating time calculated on the basis of sunrise, sunset timings and the season, to determine when it has to be switched on or turned off;
- Lights are dimmed during low traffic hours to save energy or enhanced in problematic neighborhoods to improve safety;
- A smart meter accurately calculates the energy consumption, taking into account the varying rates and automatically bills all entities with a full web based report.

lighting savings

50 % saving in maintenance costs:

In other words:  + 100 % of system availability.

How the system works

A decrease of the 40% of the luminous flux results in a power reduction of 50% so the challenges are:

A lighting upgrade is a systematic method for planning upgrades that maximize energy savings. When the staged approach is performed sequentially, each stage includes changes that will affect the upgrades performed in subsequent stages, thus setting the overall process up for the greatest energy and cost savings possible.

For maximum effectiveness, energy and lighting efficiency should be addressed right from the start of the design process in the following ways:

Lighting management system

Lighting management system

Regulating and controlling, the light output of each luminaire, to get the appropriate amount of light for the tasks to be performed, according to CEN/TR13201-1 and EN 13201 - 2/3/4 or UNI 10439 or DIN 5044 and ISO 50001, whilst controlling the power and supply voltage quality, or reducing the voltage drops, or lowering the lamp high inrush current, for the whole life of the lamp, ensures a longer lamp and driver lifetime, with an extended lamp life, from point A or B to C.
In other words the soft ignition, the control of electrical and thermal stresses and the usage of the really needed quantity of light, doubles the lamp lifetime.

Constant Light Output

luminous flux

To account for lighting-system degradation, designers typically oversize initial light output by 20 percent or more, to "maintain" minimum target illumination levels when lamps are changed and fixtures cleaned. To ensure the required illuminance the Constant Light Output (CPO) function compensates the deprecation of light output of the installation and eliminates the initial over-lighting. Depending on the installation, energy savings between 8% and 10% are very likely to achieve.

“Digital Lamp” Power Output

The longitudinal uniformity, the required lighting level and the light pole spacing, especially in an existing outdoor lighting relamping, are usually the limiting factors in determining the lamp power. Simply the lamp power needed doesn't exist. This leaves the lighting designer with no alternative but to choose the next highest wattage available, which of course inevitably leads to over-lighting.
The “Digital Lamp” function enables you to use exactly the designed power value, reducing the fixed light output to the required level, only with “a click of mouse”, while achieving a  better light quality, with a bigger general uniformity.
Depending on the installation, energy savings between 15% and 25% are very likely to achieve, while improving the General Uniformity up to 25% .